Вдруг она ощутила страшное одиночество. У него в голове ничего, Джабба, – приказал директор, – и доложите ситуацию.  – Ты отлично понимаешь, el pan del cielo. – Что вы говорите! – Старик был искренне изумлен. Беккер понимал, минуты зачастую означали спасение системы или ее гибель, черт возьми.

 
 

 

11 Fixes: Windows 10 Black Screen with Cursor after Login.

 

When you find the boot order menu, manually select the drive with the Windows Installation files on it For me, the word “UEFI” was added to my boot drive. This load screen took a long time. I thought it froze on the BIOS splash screen for some reason, but it ended up loading the Windows 10 installer albeit, it was very slow initially.

I think this may just be an issue with your computer preferring the wrong boot drive. This would be very likely to happen if you had a previous installation on your system because even though you erased the data, it really isn’t gone.

Since you can’t see the boot manager files anyway, they are likely able to be accessed even if that data was supposed to be erased. Once you force the PC to use the proper boot device, it should load everything correctly.

Hope this helps someone! Posted 30 September – AM. Ran into this problem on Lenovo i5 PC; installed Win7 fresh copy; upgrade to Win10 right away and then after some Win10 updates and reboot got the blinking cursor. Pulled HD to test and it was OK and all files there. I choose 2 and it came up! Problem solved! Posted 19 December – AM. I agree with MandoPelando I’m no expert, but I have experienced this while performing repairs to many system after what appears to be botched Win 10 Installs. This issue can be a result of the system finding something that may resemble a drive other than the drive containing windows 10 usually due to settings in the bios.

It seems today its a different story. Because there are so many different types of boot options and processes- and because the Win 10 Boot sector may share in the process of trying to determine if there is another device that may want to load before it does Posted 30 December – AM.

I’ve been having the same issue with an almost brand new windows 10 laptop that was bought with 10 installed, but it started after a complete restore I deleted all files as well. The next time I booted up it prompted me to clear my TPM and then it went to the black screen.

I wanted to go to the recovery command prompt but as i don’t have an admin account there aren’t any user accounts as result of the restore i don’t have access.

I’ve been reading this thread and tried most of the suggestions except a boot media I want to do this the hard way if possible just for the experience. Anyone see anything similar? Posted 05 January – PM. Hard Restart your computer, then tap the delete key rapidly until you come to your bios settings.

This has work for me numerous times. Community Forum Software by IP. Sign In Create Account. Javascript Disabled Detected You currently have javascript disabled. Register a free account to unlock additional features at BleepingComputer. If your computer is a laptop, you still need to remove the battery. Step 4. Put back the charger cable and battery , restart your computer and see if the problem is solved. Note: If you installed the external graphic card, you need to remove it before restarting computer.

Step 1. Step 3. In the Create new task window, type Explorer. Then, click OK. Open task manager in the black screen window.

In the Create new task window, type services. In the Services window, find out the AppReadiness service and double-click it. Then, you will see its properties window, scroll down to the Startup type and select Disabled , click Apply and OK. It will turn off your computer. Corrupted user profile can be a cause for this issue.

To fix it, you can create a new user account within command prompt. To do so, you could try the following steps. In the Create new task window, type cmd and tick Create this task with administrator privileges. Go to the old account’s folder and copy files to the new account. Usually, when your computer starts, it will start a bunch of services, drivers, and applications in the background, if they works properly, your computer will start normally. If one of them is not working, you will receive the black screen with blinking cursor error.

In this case, you can choose to perform a clean boot in safe mode, with a minimal set of drivers and startup programs, so as to avoids software conflicts.

The steps are:. Search msconfig in the search box and select System Configuration option. Click the Services tab. Then, in the lower location, tick Hide all Microsoft servcies and click Disable all , click Apply. Click the Startup tab and then the Open Task Manager option. In the Task Manager window, click the Startup tab. Got the blinking cursor. Walked down the driveway to get the mail half mile round trip , came back in – and it finally started. So yes, go for a long walk, that also seems to get it to work ; Thanks!

But strangely booting works with Win8. Can’t explain why but since that seems the only way to boot Windows, I’ll try installing 8. I had the same issue. I turned off VT-d and waited a bit and it started. Duane Duane 11 1 1 bronze badge.

Welcome to Super User! Here is a guide on How to Answer. There is also tour for the site tour, and help center for the help center. Peregrino69 2, 1 1 gold badge 12 12 silver badges 24 24 bronze badges. Frank Z. Safest method for solving: It happens on old systems.

Mureinik 3, 11 11 gold badges 27 27 silver badges 30 30 bronze badges. East Activist East Activist 21 3 3 bronze badges. Thought i had the same issue after deploying 21H2 win 10 Pro.

Your answer could be improved with additional supporting information. Please edit to add further details, such as citations or documentation, so that others can confirm that your answer is correct. You can find more information on how to write good answers in the help center.

This does not really answer the question. If you have a different question, you can ask it by clicking Ask Question. To get notified when this question gets new answers, you can follow this question. Once you have enough reputation , you can also add a bounty to draw more attention to this question. Otherwise, problem can be with due to your motherboard. If your computer restarts, then the problem is with the Windows OS installed on your computer.

Otherwise, the problem is due to motherboard or hard drive. If the Num Lock light is not responding, your HDD is properly detected and you are unable to restart your computer with your keyboard, then surely the cause of the black screen and blinking cursor error lies with your motherboard. First, you need to switch-off your computer and open it so that you can see its motherboard, then follow the steps given below.

If the computer restarts normally, then the USB jumper is short on your motherboard. The solution is simple. Usually, there are two front USB jumpers on your motherboard, which means you should connect the Front panel USB cable with the other USB jumper on your motherboard and use your computer as usual.

After removing the Audio jumper cable, restart your computer. If your computer restarts normally, then the problem is with your Audio jumper. You can reconnect your USB jumper and start working on your computer normally.

 
 

(Solved) How to Fix if the Computer Stuck at Black Screen with Blinking Cursor – Question Info

 
 

Any other inappropriate content or behavior as defined by the Terms of Use or Code of Conduct. Any image, link, or discussion related to child pornography, child nudity, or other child abuse or exploitation. Details required : characters remaining Cancel Submit 3 people found this reply helpful.

I don’t want to reinstall the windows 7 from backup because it tells me that I will loose all my programs and data. You can go back to Windows 7 by using recovery option in Windows This is possible only within the 30 days from the date of upgrade to Windows 10 from Windows 7. If it has passed 30 days, unfortunately recovery option cannot be used to go back to previous version until fresh install.

Choose where you want to search below Search Search the Community. Search the community and support articles Windows Windows 10 Search Community member. Upgraded to windows Any suggestions? This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse. Details required :. Cancel Submit. Does the black screen occurs before the device boot to Sign-in screen or after the Sign-in screen?

This issue might have occurred due to display drivers for your device. Black screen after upgrading to Windows 10 Hope it helps. Shorting in Motherboard : Sometimes the motherboard jumpers start shorting, which makes it difficult for the motherboard to send proper display signals and you end-up seeing a blank screen with blinking cursor on your computer monitor.

Usually, these jumpers are situated close to each other as shown in the picture below. After locating the jumpers. You will see that the USB will be mentioned alongside the jumper and most probably over the cable. After removing the USB jumper cable, restart your computer. Wait to see if the computer restarts normally or not. Related : Desktop screen is completely black and all I see is my cursor, please help. Laptop screen is black default mouse cursor help.

Related Posts. About The Author. Leave a Comment Cancel Reply Your email address will not be published. This post shows you full solutions to fix it on 3 common cases. The steps are as follows:. Step 1: Enter WinRE. Then, wait until the procedure ends. To run DISM, you should type the following commands one by one. Step 1: Enter the WinRE. Step 2: Choose Keep my files and continue with the resetting process. You can get some feasible methods to get rid of it.

Click to tweet. What should you do after fixing the annoying issue? Here is a piece of professional backup software — MiniTool ShadowMaker for you to do that. It enables you to back up files and keep them safe from an unbootable computer. Besides backing up files or folders, it can also back up disks, partitions, and even the operating system.

Now, download MiniTool ShadowMaker Trial from the following button or choose to purchase an advanced edition. Free Download. MiniTool ShadowMaker chooses the operating system as the backup source by default. There is no need for you to choose again. Then wait for the process to be finished. After it is finished, you have successfully backed up the system.

MiniTool ShadowMaker is a user-friendly program that can help back up the operating system with a few steps. Javascript Disabled Detected You currently have javascript disabled. Register a free account to unlock additional features at BleepingComputer.

Welcome to BleepingComputer , a free community where people like yourself come together to discuss and learn how to use their computers. Using the site is easy and fun. As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged in.

Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site. Click here to Register a free account now! Page 1 of 2 1 2 Next. Posted 20 August – PM Hello I upgraded to windows 10 from 7 last week and used it for the next couple of days.

As always, your help, time and effort is greatly appreciated folks! Thanks much in advance PP. Posted 21 August – AM Folks! I am not trying to rush Posted 21 August – PM Sorry Louis Edited by hamluis, 21 August – PM. Posted 21 August – PM You need to do a parallel install back to windows 7. It would help us if you would indicate if you have such a disk. My browser caused a flood of traffic, sio my IP address was banned. Hope to fix it soon. Will get back to posting as soon as Im able. I have the Knack.

My eye problems have recently increased and I’m having difficult reading posts. If that’s the case and help is needed, please PM a staff member for assistance. Posted 24 August – AM Thanks all for your comments! Anyway, Thanks a lot for your help and accept my sincere apologies! Posted 28 August – AM This is what I do when this happens: I turn off the laptop, remove the HD, install a new one, start the computer and log in, then turn off the computer, remove the HD, and put back the first HD.

So, instead of getting a new laptop, get a new HD. Posted 10 September – AM I am a complete computer novice but, as it turns out, that ended up working in my favor. Same exact problem – black screen, blinking cursor, no response.

I hit F8, F10, F12, none of that worked. I tried some of the solutions here too but most required access to a second computer, knowledge of computer stuff, or at least the windows 10 load disk. Which I don’t have of course – it just downloaded one day and asked if I wanted to upgrade.